need a bracket for e-trac

Only for the discussion of the Minelab E-TRAC metal detecting within this forum.
Post Reply
john_t
Posts: 16
Joined: Mon Oct 10, 2016 7:27 pm

need a bracket for e-trac

Post by john_t » Tue Apr 04, 2017 2:08 pm

Hi, guys , Anyone knows where i can buy a bracket to put on my e-trac for the bungee cord to attach to . At the moment I'm using a bicycle light bracket, don't think that will last long


many thanks
john

Harry Digger
Posts: 1281
Joined: Mon May 09, 2011 1:20 pm
Location: Liverpool
Has thanked: 1 time
Been thanked: 3 times

Re: need a bracket for e-trac

Post by Harry Digger » Tue Apr 04, 2017 9:13 pm

You don't need a bracket mate.
I have mine set up like this ::g
bungee.jpg
You do not have the required permissions to view the files attached to this post.
Roy Everett ‏@RoyEverett 1h
I'm outside Old Trafford and there's a guy burning small effigies of Rooney and selling them to fans. Oh, hang on. It's a baked potato stand.

john_t
Posts: 16
Joined: Mon Oct 10, 2016 7:27 pm

Re: need a bracket for e-trac

Post by john_t » Wed Apr 05, 2017 10:59 am

cheers for the picture harry digger
will order some bungee cords

GC-1023
Posts: 298
Joined: Tue Apr 28, 2015 5:48 pm
Has thanked: 7 times
Been thanked: 1 time

Re: need a bracket for e-trac

Post by GC-1023 » Tue Apr 18, 2017 2:04 pm

my daughter is seven and has to use hair band at school , used in same way as above picture they do a excellent job . never broke ,but if your worried just use two of them .
minelab musketeer ts800 ,13" ultimate ,15 x18 sef
Etrac , 6" eq2,10 x12" sef,detech 18".
deeptech Gold
nokta relic. 5" +11"
Golden mask gm1+
garrett groundhog
BH Junior(for kids on beach)

ianp
Posts: 8
Joined: Sat Aug 06, 2011 6:25 pm

Re: need a bracket for e-trac

Post by ianp » Thu Apr 27, 2017 6:16 pm

And where does the the bottle of Jack Daniels come in Harry? :D

sweepstick47
Posts: 4460
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 26 times
Been thanked: 95 times

Re: need a bracket for e-trac

Post by sweepstick47 » Thu Apr 27, 2017 10:23 pm

Nice one 'Harry digger' ::g The most simple and obvious solutions to any practical problem can usually be arrived at with the minimum ability in DIY skills......and they are usually low cost or no cost! (yes I know, I'm a Yorkshireman)!!
Some excellent examples of this can be seen on the 'Tips and DIY' forum. Good Luck. Regards ss47
Arado 130 - Garrett Groundhog - Tesoro Eldorado - Fisher 1265X - Goldmax Power Makro Racer. Homemade Harness!

sweepstick47
Posts: 4460
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 26 times
Been thanked: 95 times

Re: need a bracket for e-trac

Post by sweepstick47 » Thu Apr 27, 2017 10:28 pm

ianp wrote:
Thu Apr 27, 2017 6:16 pm
And where does the the bottle of Jack Daniels come in Harry? :D
Good observation 'Ianp' !- Yes, I see it's an empty one too :D Regards ss47
Arado 130 - Garrett Groundhog - Tesoro Eldorado - Fisher 1265X - Goldmax Power Makro Racer. Homemade Harness!

Harry Digger
Posts: 1281
Joined: Mon May 09, 2011 1:20 pm
Location: Liverpool
Has thanked: 1 time
Been thanked: 3 times

Re: need a bracket for e-trac

Post by Harry Digger » Thu Apr 27, 2017 11:51 pm

ianp wrote:
Thu Apr 27, 2017 6:16 pm
And where does the the bottle of Jack Daniels come in Harry? :D
3 litre bottle in it's own cradle B-)

Image

It hasn't been topped up, not even once, since we got it just before Christmas... Honest ;)
Roy Everett ‏@RoyEverett 1h
I'm outside Old Trafford and there's a guy burning small effigies of Rooney and selling them to fans. Oh, hang on. It's a baked potato stand.

clint
Posts: 3710
Joined: Tue Jun 28, 2011 9:12 pm
Location: Wrexham
Been thanked: 7 times

Re: need a bracket for e-trac

Post by clint » Mon May 01, 2017 5:37 pm

20170501_173039-816x459.jpg
Here's my effort...made with bits off the "popular auction site"..you can make loads for a few quid..

Regards

Clint
You do not have the required permissions to view the files attached to this post.
Etrac.13" Ultimate Coil.CP3 TT`s
8x6 sef
Euroace.
Deteknix Pointer,camo,oh yeah! ...does what it says on the box..
Garrett Propointer..ok...(now it's fixed!)
Jeff`s big tool!

sweepstick47
Posts: 4460
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 26 times
Been thanked: 95 times

Re: need a bracket for e-trac

Post by sweepstick47 » Tue May 02, 2017 6:00 pm

clint wrote:
Mon May 01, 2017 5:37 pm
20170501_173039-816x459.jpg
Here's my effort...made with bits off the "popular auction site"..you can make loads for a few quid..

Regards

Clint
That's a very professional looking DIY job 'clint' ::g I believe, of it's type, it's a popular accessory that would:
A: Be a popular purchase on the forum's Auction Site!!

B: As it's a DIY related project, you may want to consider adding the 'how it's done' details (for the newer arrivals to the hobby) and 'post' it in the DIY Forum. Just a thought. Regards ss47 ::g
Arado 130 - Garrett Groundhog - Tesoro Eldorado - Fisher 1265X - Goldmax Power Makro Racer. Homemade Harness!

Post Reply

Return to “Minelab E-TRAC Forum”

Who is online

Users browsing this forum: No registered users and 7 guests