GP Pointer Shell??

Please post all topics related to metal detecting pinpointers, probes here please.
MDF Auction - Metal Detecting Pinpointers
Post Reply
sparksville
Posts: 4
Joined: Sat Apr 14, 2018 9:25 pm
Been thanked: 1 time

GP Pointer Shell??

Post by sparksville »

Good Morning,

My Garrett Pro Pointer 2 has a big hole in the end of it now after some heavy use and i have made several attempts to repair it but all failed.

My question is: do the Garrett pro pointers and the GP pointers have identical shells?

Can i remove the internals of my Garrett pro pointer2 and put them into the GP as a straight swap?

i know this maybe frowned upon and unethical to do but need must. I have tried to find a replacement shell for mine but they dont exist.

Any advise will be appreciated.

Sparksville :-)



User avatar
sweepstick47
Moderator
Posts: 11262
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 2420 times
Been thanked: 3129 times

Re: GP Pointer Shell??

Post by sweepstick47 »

Your predicament is not easily answered as I doubt if it's been attempted before but as the saying goes, if you don't try it, perhaps you'll never know and there's nothing to lose. anyway ::g
Good Luck - Regards ss47
A disservice is no service at all.

User avatar
f8met
Posts: 2924
Joined: Wed May 08, 2013 12:14 am
Location: Cambs and Suffolk
Has thanked: 176 times
Been thanked: 802 times

Re: GP Pointer Shell??

Post by f8met »

Regtons do genuine replacement shells for the series 1. May be worth calling them?

https://regton.com/pro-pointer-coil-ass ... using.html
Dave
Deus, 9" and 11" black coil
2020 3 Hammered

Fusion
Posts: 4907
Joined: Thu Sep 16, 2010 11:47 am
Location: Herts
Has thanked: 2 times
Been thanked: 568 times

Re: GP Pointer Shell??

Post by Fusion »

Garrett's coil is glued in to the housing, with some kind of potting resin, so it's never going to come out. The GP coil slides out attached to the circuit-board, doesn't it?

sparksville
Posts: 4
Joined: Sat Apr 14, 2018 9:25 pm
Been thanked: 1 time

Re: GP Pointer Shell??

Post by sparksville »

Hi Guys,

Thanks for the replies.

I have gone ahead and purchased a GP pointer in an effort to try the fix. For £10:99 its worth a try.

I ordered the replacement shell from Regtons but it bounced back with a note saying they no longer stock them ( although it is showing as in stock on the website?).

With regards to the gluey resin. the Propointer 2 does not have the resin on it but the propointer 1 does. Maybe they found a way not to use it or even worse, forgot to apply it to mine!

All the dimensions seem to match up so i will give it a try and feedback.

cheers

User avatar
pengles
Posts: 240
Joined: Sun Feb 25, 2018 9:43 am
Has thanked: 191 times
Been thanked: 190 times

Re: GP Pointer Shell??

Post by pengles »

Why not just use the GP until it gives up, then change it over. I've been using my GP now for over two years, several times a week and it's still going strong.
XP Deus Light
GP pointer

Pete E
Posts: 792
Joined: Mon Feb 11, 2019 3:59 pm
Location: North Wales
Has thanked: 593 times
Been thanked: 294 times

Re: GP Pointer Shell??

Post by Pete E »

sparksville wrote:
Wed Sep 11, 2019 10:28 am
Good Morning,

My Garrett Pro Pointer 2 has a big hole in the end of it now after some heavy use and i have made several attempts to repair it but all failed.

My question is: do the Garrett pro pointers and the GP pointers have identical shells?

Can i remove the internals of my Garrett pro pointer2 and put them into the GP as a straight swap?

i know this maybe frowned upon and unethical to do but need must. I have tried to find a replacement shell for mine but they dont exist.

Any advise will be appreciated.

Sparksville :-)
I am pretty sure you can get plastic covers for the probe part of Pro Pointer 2 on that famous auction site..If you can, why not simply glue one in place?
Equinox 800
Whites TRX Pinpointer
Makro Racer 2
Makro Pinpointer
August EP650 Wireless headphones
TaoTronics Wireless Portable Transmitter, (Bluetooth 4.1, aptX Low Latency)

User avatar
RossDG
Posts: 262
Joined: Mon Mar 12, 2018 10:17 am
Has thanked: 180 times
Been thanked: 159 times

Re: GP Pointer Shell??

Post by RossDG »

Repair resin then put a work glove finger over it?
Equinox 600
Garrett EuroACE
Pro find 35 pinpointer
Leaky wellies!

User avatar
Wessexlad
Posts: 536
Joined: Sat Dec 30, 2017 4:47 pm
Location: S Cambs
Has thanked: 89 times
Been thanked: 201 times

Re: GP Pointer Shell??

Post by Wessexlad »

pengles wrote:
Wed Sep 11, 2019 12:00 pm
Why not just use the GP until it gives up, then change it over. I've been using my GP now for over two years, several times a week and it's still going strong.
Exactly what I would have suggested, the GP pointer does the job, and if/when it gives out you have a shell to experiment with. What have you got to lose?
I've produced some leaflets about how to start a fight with people.

Who wants some?!?!?

Post Reply

Return to “Metal Detecting Pinpointers”