Digging equipment

Please post any topics related to metal detecting spades, trowels and general Digging tools here.
MDF Auction - Metal Detecting Spades
Post Reply
User avatar
Posts: 514
Joined: Sat Dec 30, 2017 4:47 pm
Location: S Cambs
Has thanked: 88 times
Been thanked: 191 times

Digging equipment

Post by Wessexlad » Sun Aug 19, 2018 9:05 pm

Out yesterday on my permission for the second time. There were almost two months between visits, both times (i.e. before and after the hot spell) the first four inches or so were easy to dig, but below that the soil is hard packed and sandy, with fairly large flint pebbles. I'd dig a plug maybe 10" to 12" square, but after that it's quite difficult to get the spade in, so I used a trowel to go deeper. The problem is, the deeper I go the narrower the hole gets, and in trying to scrape away the soil there's a danger that I'd damage any object that might be down there.

My question is, what would be the best equipment to use in these circumstances? The spade and trowel I use didn't cost a lot but they're pretty robust and would be fine in softer soil. Can anyone recommend something that might cut through harder packed soil?

There's nothing as sweet as the sound of children's laughter coming from upstairs.

Unless of course you live alone.

User avatar
Posts: 2089
Joined: Thu Jul 30, 2015 12:54 pm
Location: Wiltshire
Has thanked: 666 times
Been thanked: 1179 times

Re: Digging equipment

Post by Steve_T » Mon Aug 20, 2018 11:24 am

That's where a pinpointer comes in handy, narrow down you items location, desensitise the pinpointer to work out size and location and dig carefully.

If your holes that big at the top should be able to loosen it enough to get out with your your spade to a decent depth of around a good 16 inches, follow the outline of the hole downwards, your digging stuff out not planting carrots, loosen the rest on the bottom edges and remove with your hand, shimples.......

I've dug post holes to around 24 inches in a 12 inch square with a spade but still scoop stuff out with my hands

Regards Steve
Try not to become a man of success, but rather try to become a man of value.

Albert Einstein

User avatar
Posts: 12198
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 4897 times
Been thanked: 5700 times

Re: Digging equipment

Post by Oxgirl36 » Mon Aug 20, 2018 8:42 pm

Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

Hammered silver 2019 - 26 B-)

User avatar
Posts: 373
Joined: Sun Feb 11, 2018 2:18 pm
Has thanked: 352 times
Been thanked: 215 times

Re: Digging equipment

Post by Shaneb3 » Mon Aug 20, 2018 9:02 pm

I'm currently using a trenching spade in heavy flint clay. The narrow blade means you can keep the hole fairly small in diameter but get down as deep as needed. I'm sure a pinpointer would help as Steve suggests but I've just been pinpointing with the detector with a large 15" coil without problems (so far rl; ). I also do as Steve suggests and loosen a little of the bottom and remove by hand and repeat. I probably wouldn't get very far without sole protection in my boots though ::g

User avatar
Posts: 2923
Joined: Wed May 08, 2013 12:14 am
Location: Cambs and Suffolk
Has thanked: 176 times
Been thanked: 801 times

Re: Digging equipment

Post by f8met » Tue Aug 21, 2018 9:34 am

I use a roughneck from all good DIY stores. I was a bit reluctant as they look quite flimsy and I only got one as I left my black ada at home. This summer the roughneck has come into its own in the solid ground.I managed to bend the black ada but although it flexes, the roughneck held its own.

https://www.wickes.co.uk/Roughneck-Micr ... t/p/139275

or their own brand

https://www.wickes.co.uk/Wickes-Round-M ... l/p/167380

I find that if you dig into the side of the hole and try to widen it inside to loosen the earth, and then use your hands making sure keep well away from the find, you can get it out without hitting it.
Deus, 9" and 11" black coil
2019 25 Hammered
Hit my 200th hammered!

User avatar
Posts: 2777
Joined: Tue Mar 06, 2018 5:07 pm
Location: South Cambs
Has thanked: 2719 times
Been thanked: 1397 times

Re: Digging equipment

Post by Bradrick » Tue Aug 21, 2018 2:58 pm

My pasture sounds similar to yours, with an initial depth of soil to about 4 inches, followed by hard compact stones/flint. I use one of the joan allen yellow jobbies. It does the job and I prefer a narrow blade (I tend to dig a 4 inch plug of around 6 inches square), but I'm sure there are better ones. I did use a Black Ada trowel to get through the hard stuff and it was pretty good, but I often found really stubborn large stones that I struggled to winkle out due to the width of the blade. I now have a Garratt edge digger and it is great for the job. If the pp shows that the target is in the side walls the serrated edge makes short work of it and the point is ideal for prising the stones out.
Equinox 800
Garrett Ace 400i
C-Scope 1220b

“My life has been full of terrible misfortunes most of which never happened.”

Post Reply

Return to “Metal Detecting Spades and Digging Tools”