Well Hello There!

This is not compulsory but if you would like to tell us a little about yourself then post here.
Post Reply
User avatar
Ruffers22
Posts: 38
Joined: Thu May 30, 2019 12:49 pm
Location: Burscough, Lancs
Has thanked: 94 times
Been thanked: 13 times

Well Hello There!

Post by Ruffers22 » Tue Jun 11, 2019 6:01 pm

Hi there, from a soon to be detectorist.

I've always had an interest in detecting as a hobby but have only recently decided to act on that interest.

So after months of tinternet research and Youtube vids, I am about ready to pull the trigger on a Equinox 800 as a first metal detector and was hopefully looking for some words of encouragement from some time served detectorists out there that I am doing the right thing, especially being a newbie?

Some other factors that helped me decide detecting was hopefully the new hobby for me, is that I grew up around farms and farmers and the fact that most of my pals are now said farmers and landowners,this would hopefully help me obtain some permissions.

In fact luckily for me one good buddy that has already said I can go over his land, has a marked Roman road running right across one well hidden field that crosses a small river/stream and along the edge of a large wood which according to my pal has never had anyone over it for as long as he can remember :D :D

So with any luck and a lot of practice, I hope to be pulling up some interesting stuff very soon???

The only issue I might have is the said land around this particular farmland has a pheasant shoot over it so I think old cartridge cases may be an issue.

Anyway thank you in advance for any advise & words of encouragement ::g



User avatar
dig-dog
Posts: 899
Joined: Sat Jan 26, 2013 2:24 pm
Location: Kent
Has thanked: 275 times
Been thanked: 290 times

Re: Well Hello There!

Post by dig-dog » Tue Jun 11, 2019 6:06 pm

Welcome from sunny Kent
DD ::g
E-trac 13" ultimate coil.
Full XP Deus 11" coil / hf elliptical coil
Sniper spade

User avatar
GeorgeMK
Posts: 173
Joined: Fri Jan 18, 2019 1:27 pm
Location: Milton Keynes
Has thanked: 326 times
Been thanked: 129 times

Re: Well Hello There!

Post by GeorgeMK » Tue Jun 11, 2019 6:15 pm

Welcome from Buckinghamshire.

User avatar
bazzerhut
Posts: 433
Joined: Mon Apr 25, 2016 1:17 am
Location: Norfolk
Has thanked: 165 times
Been thanked: 271 times

Re: Well Hello There!

Post by bazzerhut » Tue Jun 11, 2019 6:17 pm

With that starter pack of promising permission + outstanding detector, I'd say you're on a really good track. Good luck, and show us yer booty soon.

Barry
Equinox 800 / XP Deus

"We have left undug those things which we ought to have dug; And we have dug those things which we ought not to have dug; And there is no wealth in us."

Timmy 64
Posts: 327
Joined: Fri Apr 01, 2016 9:45 am
Been thanked: 92 times

Re: Well Hello There!

Post by Timmy 64 » Tue Jun 11, 2019 6:31 pm

Hi there from sunny Cornwall 👍

User avatar
sweepstick47
Moderator
Posts: 10278
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 1946 times
Been thanked: 2676 times

Re: Well Hello There!

Post by sweepstick47 » Tue Jun 11, 2019 6:47 pm

Hello Ruffers22 and a warm welcome aboard on this very soggy and rather dismal day.
Thank you for the informative introduction ::g

Undoubtedly your decision to go with a specific detector is the result of much deliberation and prior research so I'm sure you will be well placed to meet the prospect of taking on a high-end machine at the very outset ::g We have a number of experienced users of your chosen model so you can be assured of well considered answers to any questions you may have lined-up.

The Forum Guide at the top of this page is recommended reading both for new forum members and newcomers to the hobby.

Good Luck and enjoy your time as a member of the MDF community. ::g

Regards ss47
A disservice is no service at all.

User avatar
Ruffers22
Posts: 38
Joined: Thu May 30, 2019 12:49 pm
Location: Burscough, Lancs
Has thanked: 94 times
Been thanked: 13 times

Re: Well Hello There!

Post by Ruffers22 » Wed Jun 12, 2019 7:45 pm

Thank you all for the warm welcome,

I cant wait to get going.
Busy just putting a few bits & bobs together to aid my first outing.
Hopefully it wont be to long before I'm digging my first signal.
Cheers. ::g

User avatar
Roughwood
Posts: 479
Joined: Wed Feb 07, 2018 10:48 am
Location: Norfolk
Has thanked: 410 times
Been thanked: 240 times

Re: Well Hello There!

Post by Roughwood » Wed Jun 12, 2019 10:03 pm

Hello Ruffers. You'll find shotgun cartridge caps wherever you detect ::g
Makro Racer 2
Tesoro Silver Sabre Plus
Nokta Pinpointer

User avatar
Ladybird66
Posts: 2014
Joined: Wed Apr 04, 2018 10:03 pm
Has thanked: 748 times
Been thanked: 1447 times

Re: Well Hello There!

Post by Ladybird66 » Wed Jun 12, 2019 11:43 pm

Hello Ruffers and welcome to the wonderful world of high hopes.

My only advice to you would be, don’t fiddle. Get to know the machine, as it is, out of the box first.
It’ll be a long learning curve without following other people’s ideas on what settings to change.

It’s a great machine and can be used ‘out if the box’ quite successfully. I’m sure you’ll soon be posting finds, best of luck.

Don’t be backward in asking for advice though. Plenty of experienced users here will help.

User avatar
FUBAR
Posts: 5928
Joined: Sat Aug 14, 2010 1:23 pm
Has thanked: 179 times
Been thanked: 300 times

Re: Well Hello There!

Post by FUBAR » Thu Jun 13, 2019 10:56 am

Hi and welcome to the forum. Greetings from East Riding.

Chris55bc
Posts: 31
Joined: Fri Jun 07, 2019 10:36 pm
Location: Portsmouth
Has thanked: 7 times
Been thanked: 11 times

Re: Well Hello There!

Post by Chris55bc » Thu Jun 13, 2019 10:42 pm

Hey whats up great intro, sounds like you're onto a winner with your buddies with some being farmers and all, anyway, keep my fingers crossed and hope to be hearing about your adventures in the underworld. All the best, Chris

Post Reply

Return to “Introduce yourself here Forum”