Tesoro / Laser Videos
- Posts: 883
- Joined: Tue Feb 07, 2017 12:44 pm
- Location: Norfolk
- Has thanked: 1164 times
- Been thanked: 874 times
I have heard some good reviews about these machines and was interested to know if any other members here use or have used them and what they think about them . I have read that back in the day they were a good machine and will hold their own now up against the new technology we get with the latest models on the market .
I am particularly interested in what depth the 7 inch coil can manage .
My current back up machine is the Ace 250 , I have no problems with this detector other than my hand tends to slip down up against the control box and can get quite uncomfortable when swinging the 250 side to side . The idea of the control box on the Sabre having the option of a belt attachment is certainly appealing .
Thanks in advance .
- Posts: 6389
- Joined: Wed Mar 29, 2017 9:18 am
- Location: scottish middle march
- Has thanked: 7002 times
- Been thanked: 3555 times
I was lucky enough to have a golden sabre as my first machine
And loved it
Was upset to sell it.
It pulled some great finds out of the ground
Including a viccy half sovereign
(Two weeks into detecting)
That was 6 inches down.
Mine had the solid white coil-i think it was a deep or wide scan
Depth never seemed to be an issue.
Also had a brown doughnut coil-that appeared to be very sensitive.
Im sure there will be some good replies to your query coming up
A bit more in depth
But i loved it-and the resale was more than i paid for it originally
That tells you something
- Posts: 4818
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 407 times
- Been thanked: 1449 times
I have a Bandido with a 10" and 5.5" coil. There's not much difference in depth between them on smaller targets. The 5.5" will just pull up a pre decimal coin at 10" in the ground. Smaller coins are around the 7" mark.
The 10" coil is about the same on a cut half but about an inch or so deeper on a pre decimal half penny.
That's in my garden.
- Posts: 10264
- Joined: Sun Nov 27, 2011 8:21 pm
- Location: North Lincolnshire
- Has thanked: 1943 times
- Been thanked: 2673 times
I'm not aware of any specific problems with the Golden Sabre or any of the Tesoro range of that period, although the battery 'pods' need to be checked for cracks at both ends together with the coil cable which should be checked where it enters the coil for damage. I believe the Golden Sabre was a 'Notch discriminator'.
It's an easy to operate machine, well built with a strong protective aluminium control box.
All in all a very reliable machine which can as you say be belt or chest mounted (my own choice).
I hope this is in some way helpful. All the best - Regards ss47
PS. My 'Eldorado' is still going strong -purchased new in 1987!
- Posts: 478
- Joined: Wed Feb 07, 2018 10:48 am
- Location: Norfolk
- Has thanked: 410 times
- Been thanked: 240 times
I have been detecting now for only a few months. My machine is a Tesoro Silver Sabre Plus. In it's original condition etc. It didn't break the bank and has proved it's worth to me several times. Combined with a Nokta pinpointer I have had some good finds - albiet my permission is rather limited.
I have been fortunate enough to have had a lot of helpful advice via the forum and 'in the field' from some experienced detectorists, so that undoubtedly has helped.
I can honestly say that when the time comes to upgrade, I'll certainly look at Tesoro again and I have no intention of ever getting rid of the SS+
Hope this is helpful to you.
Tesoro Silver Sabre Plus