Tesoro / Laser Videos
- Posts: 11615
- Joined: Sun Feb 21, 2010 1:34 pm
- Location: Somerset
- Has thanked: 1466 times
- Been thanked: 1330 times
Its not meant to be up there
It will be sensing all sorts of stuff and EMI etc
You need to be in a field really to test the machine properly
- Posts: 11268
- Joined: Sun Nov 27, 2011 8:21 pm
- Location: North Lincolnshire
- Has thanked: 2422 times
- Been thanked: 3132 times
It's quite common with all detectors of it's design. This potential problem can arise due to perfectly normal use.
The spring cable protector which is secured into the coil plug at the control box housing end, sometimes works it's way further into the coil-connecting plug causing an intermittent short circuit (producing the false signals such as your are experiencing).
The remedy is straight forward - give the spring cable protector (not the cable)! a gentle pull to bring it back to it's correct position but being careful not to completely pull it right out of the plug.
Before doing this, I would suggest checking that the cable plug's tightening screw, is tight enough to ensure the plug/socket 'pins' are making a good contact. Good Luck - Regards ss47