Coil cover

Garrett Ace 400i Metal detector Topics Only.
Post Reply
oldun
Posts: 4
Joined: Mon Aug 26, 2019 1:48 pm

Coil cover

Post by oldun » Tue Sep 10, 2019 5:59 pm

Hello All,
I have just bought the 400i and find that the coil cover does not fit without falling off. Do any of you find the same problem? If so what do you about it, or, if so do you just go without it. Using it with a sling and digging tends to scrape the coil along the sand which can't do the it any good. Thanks



User avatar
Oxgirl36
Moderator
Posts: 10696
Joined: Sun Jul 10, 2016 6:54 pm
Location: Oxfordshire
Has thanked: 4326 times
Been thanked: 4823 times

Re: Coil cover

Post by Oxgirl36 » Tue Sep 10, 2019 7:52 pm

Either use plastic ties to secure it, or masking or parcel tape. Some people like to use sealant round the coil covers to minimise sand getting in, which could work to secure it too I guess.

If all else fails you could buy a replacement. I wouldn’t recommend detecting without a cover on sand because it’s so abrasive and, I guess, the salt could be harmful too?
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

Hammered silver 2019 - 20 8=ypr

oldun
Posts: 4
Joined: Mon Aug 26, 2019 1:48 pm

Re: Coil cover

Post by oldun » Wed Sep 11, 2019 10:54 am

Thank you Oxgirl36 I think I will use tape, that way I can keep the coil cleaner, tape is easy to remove and reapply.

littlehove
Posts: 275
Joined: Tue Jun 11, 2019 12:06 pm
Has thanked: 85 times
Been thanked: 99 times

Re: Coil cover

Post by littlehove » Thu Sep 12, 2019 12:34 pm

Mine fits tightly like a glove. You could always contact the retailer. They may send you a replacement coil cover. Worth a try?

LloydF
Posts: 103
Joined: Sun Jun 09, 2019 5:16 pm
Has thanked: 35 times
Been thanked: 58 times

Re: Coil cover

Post by LloydF » Thu Sep 12, 2019 4:29 pm

Might be a silly question but are you pushing it until it "clicks" on?
Garrett ACE 400i
Garrett Pro pointer AT

User avatar
steve r
Posts: 38
Joined: Thu Jun 27, 2019 5:16 pm
Location: Essex
Has thanked: 78 times
Been thanked: 17 times

Re: Coil cover

Post by steve r » Thu Sep 12, 2019 4:55 pm

The 400i coil cover is a very tight fit, you need to push it on really hard all round until it clicks into place, if It's loose or doesn't fit you have the wrong coil cover.
Life is not a journey to the grave with the intention of arriving safely in a pretty, well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming, what a trip!

Garrett 400i, Pro pointer AT,

oldun
Posts: 4
Joined: Mon Aug 26, 2019 1:48 pm

Re: Coil cover

Post by oldun » Sun Sep 15, 2019 4:59 pm

From the retailer.....Soak coil in hot (not boiling) water, problem solved, thanks for your input.

User avatar
Oxgirl36
Moderator
Posts: 10696
Joined: Sun Jul 10, 2016 6:54 pm
Location: Oxfordshire
Has thanked: 4326 times
Been thanked: 4823 times

Re: Coil cover

Post by Oxgirl36 » Sun Sep 15, 2019 5:15 pm

Did that work? Great tip if it did ::g
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

Hammered silver 2019 - 20 8=ypr

oldun
Posts: 4
Joined: Mon Aug 26, 2019 1:48 pm

Re: Coil cover

Post by oldun » Sun Sep 15, 2019 5:37 pm

Yes it does seem to work, a good tip for others with the same problem.

Post Reply

Return to “Garrett ACE 400i Forum”