Minelab CTX3030 - Accessories

Only for the discussion of the Minelab CTX 3030 metal detector within this forum.
Post Reply
User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Minelab CTX3030 - Accessories

Post by Dave8472 » Fri Jun 08, 2012 10:01 am

Hi all, here is a list of known accessories currently available :

CTX 06 Smart Coil

Image

The waterproof 6-inch round Double-D coil is very sensitive to small targets, and perfect for finding treasure in high trash areas. It is also ideal for manoeuvring in difficult terrain. A protective skidplate is included. (part # 3011-0114)

CTX 17 Smart Coil

Image

The waterproof 17 × 13-inch elliptical Double-D coil provides maximum depth for specialised treasure hunting. It is also great for wide ground coverage in open spaces. A protective skidplate is included. (part # 3011-0116)

Waterproof Headphones

Image

These fully submersible headphones provide excellent audio for all weather conditions and underwater use. (part # 3011-0134)

WM 10 Wireless Module

Image

This module provides clear wireless audio without any perceivable time delay. Use the built-in speaker or your choice of headphones. (part # 3011-0120)
*Supplied with Standard Pack only. Available as accessory for Starter Pack.


Replaceable Battery Pack

Image

Forgotten to charge your battery? This pack provides the option of using 8 x AA cells as an alternate power source. (part # 3011-0117)
*Supplied with Standard Pack only. Available as accessory for Starter Pack.
^Not supplied with AA battery cells


Official direct link

Accessories

© MINELAB ELECTRONICS PTY LTD. ALL RIGHTS RESERVED


Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Tombs
Posts: 638
Joined: Mon Sep 26, 2011 4:40 pm
Location: Norwich/wales
Contact:

Re: Minelab CTX3030 - Accessories

Post by Tombs » Fri Jun 08, 2012 1:59 pm

i have also heard a rumor that detech are making a 15" ultimate for it but i dont know if there is any truth in this.
would be nice if it was true :D
E Trac
deus for rainy days
Garrett pin pointer

User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Re: Minelab CTX3030 - Accessories

Post by Dave8472 » Fri Jun 08, 2012 2:03 pm

Tombs wrote:i have also heard a rumor that detech are making a 15" ultimate for it but i dont know if there is any truth in this.
would be nice if it was true :D
I agree, only if to give Minelab a bit of completion on the price ?

I had two SEF's for my Explorer and both performed very well ::g

Dave s;..
Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Philthy Phil
Posts: 5728
Joined: Wed Feb 02, 2011 9:04 pm
Location: South Warwickshire
Has thanked: 1 time
Been thanked: 6 times

Re: Minelab CTX3030 - Accessories

Post by Philthy Phil » Tue Dec 25, 2012 11:36 pm

I see Joan Allen, Pro-Tectors & Crawfords are all selling control box & upper stem covers now ::g
Minelabbed to the bone!

CTX 3030 with 'a few' coils
X-Terra 505 & many coils
Pro Find 35
2 metal knees
Trusty Zippo


Eagles may soar on high but weasels don't get sucked into jet engines!

User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Re: Minelab CTX3030 - Accessories

Post by Dave8472 » Tue Dec 25, 2012 11:42 pm

Philthy Phil wrote:I see Joan Allen, Pro-Tectors & Crawfords are all selling control box & upper stem covers now ::g
Hi Phil
I haven't seen the protector one yet, I personally don't like the look of the Crawfords one and the Joan Allan one looks ok but would want to buy it cheaper with out the handle cover ?

Best one I have seen is in the US, but it is big bucks, and can come with a sun hood ::g

The Australian one looks quite good, but the only seller on the bay doesn't know how to list an international listing lol. Despite me messaging him it wouldn't let me bid

Dave ';
Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Tombs
Posts: 638
Joined: Mon Sep 26, 2011 4:40 pm
Location: Norwich/wales
Contact:

Re: Minelab CTX3030 - Accessories

Post by Tombs » Wed Dec 26, 2012 3:42 pm

Dave8472 wrote:
Philthy Phil wrote:I see Joan Allen, Pro-Tectors & Crawfords are all selling control box & upper stem covers now ::g
Hi Phil
I haven't seen the protector one yet, I personally don't like the look of the Crawfords one and the Joan Allan one looks ok but would want to buy it cheaper with out the handle cover ?

Best one I have seen is in the US, but it is big bucks, and can come with a sun hood ::g

The Australian one looks quite good, but the only seller on the bay doesn't know how to list an international listing lol. Despite me messaging him it wouldn't let me bid

Dave ';
do you just want the screen cover? if so i might be able to help ;)
E Trac
deus for rainy days
Garrett pin pointer

User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Re: Minelab CTX3030 - Accessories

Post by Dave8472 » Wed Dec 26, 2012 7:40 pm

Hi Tombs, thanks for the offer, hang fire for the moment as I have had a plan, (thanks Phil) and an e-mail is on it's way ::g

Dave ';
Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Philthy Phil
Posts: 5728
Joined: Wed Feb 02, 2011 9:04 pm
Location: South Warwickshire
Has thanked: 1 time
Been thanked: 6 times

Re: Minelab CTX3030 - Accessories

Post by Philthy Phil » Wed Dec 26, 2012 9:22 pm

Dave8472 wrote:Hi Tombs, thanks for the offer, hang fire for the moment as I have had a plan, (thanks Phil) and an e-mail is on it's way ::g

Dave ';

Got 'em crossed for ya buddy ;)
Minelabbed to the bone!

CTX 3030 with 'a few' coils
X-Terra 505 & many coils
Pro Find 35
2 metal knees
Trusty Zippo


Eagles may soar on high but weasels don't get sucked into jet engines!

User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Re: Minelab CTX3030 - Accessories

Post by Dave8472 » Wed Jan 02, 2013 8:59 pm

Hi all, got the "Joan Allen cover kit" turn up today, first impressions are it looks better than I thought ::g

Will do a review and youtube vid as soon as I can to show you how it looks and fits, hopefully Friday onwards ;)

Dave ';
Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Broadsword
Posts: 735
Joined: Thu Dec 09, 2010 3:59 pm
Location: Surrey UK
Contact:

Re: Minelab CTX3030 - Accessories

Post by Broadsword » Tue Jan 08, 2013 6:01 pm

Hi - I have the Joan Allen cover kit and it's pretty good, nice snug fit on the control box.

Also for those who want to know about numbers and finds for the CTX - I had a hammered at 12 Inches using the Large Coil and pinpointing was spot on. Number was 12:15 (Ringpull territory). The signal was crystal clear (on smooth) so im becoming increasingly happy with the big coil. ::g ::g
http://www.lostrings.co.uk
"Only once a find is recorded is it truly discovered, and through recording finds with the PAS metal-detecting can make a truly positive contribution to archaeology" British Museum.
RINGS returned 2014=19 Not found = 8

Scratcher
Posts: 1365
Joined: Mon Jan 07, 2013 4:58 pm
Location: Plymouth

Re: Minelab CTX3030 - Accessories

Post by Scratcher » Fri Dec 13, 2013 8:59 pm

Hi, anyone ideas on the cheapest place to buy the 6" coil please? Ta in advance! ::g :D

Mark White
Posts: 159
Joined: Fri Jul 19, 2013 11:21 am
Location: Swindon

Re: Minelab CTX3030 - Accessories

Post by Mark White » Fri Dec 13, 2013 11:07 pm

Dave8472 wrote:Hi all, got the "Joan Allen cover kit" turn up today, first impressions are it looks better than I thought ::g

Will do a review and youtube vid as soon as I can to show you how it looks and fits, hopefully Friday onwards ;)

Dave ';
Hi Dave,

I also today got my CTX cover kit today,but from pro-tectors it has a sun shade and is available in black or woodland camo and they also do a cover for the WM-10 also in black an woodland camo.
The fit like a glove and look really good.

Mark
MInelab CTX3030 + Pro find 25 pinpointer

User avatar
Dave8472
Moderator
Posts: 11183
Joined: Sun Jun 13, 2010 8:52 pm
Location: Kent
Has thanked: 346 times
Been thanked: 279 times

Re: Minelab CTX3030 - Accessories

Post by Dave8472 » Sat Dec 14, 2013 8:39 am

Hi Mark, yes the shade (Visor) version is a good idea, very difficult to see the display in full sun ::g

I have been waiting for the WM10 cover to come back in to stock, I had signed up to be notified when it does, but pro-tectors never e-mailed me ;;z

Edit : see they are out of stock of the normal black one, but have some camo ones left :D

But £4 post B| :-O err no thanks

Dave &*(
Minelab CTX3030 : 17", 11", 6" Coils
Minelab Equinox 800 : 15", 11" Coils
XP Deus V3.2 - WS5 : 9" Coil
Garrett Pro Pointer AT
Garmin eTrex 20 GPS

Post Reply

Return to “Minelab CTX 3030 Forum”