Only for the discussion of the Minelab CTX 3030 metal detector within this forum.
- Posts: 1
- Joined: Mon Dec 03, 2018 7:37 am
- Been thanked: 1 time
Hello. I have been a stupid boy and have broke the jack on my underwater headphones of. Meaning the pins are stuck in the female jack of my detector . Can see them but not enough sticking out to grab. Anybody got any bright ideas of how I can remove them .
- Posts: 63
- Joined: Fri Sep 21, 2018 5:48 pm
- Location: Rh10
- Has thanked: 52 times
- Been thanked: 50 times
Mate!... I know what I’d do
..... get your self a wooden skewer and dab a drop of super glue on it, then very gently apply it to the piece inside the socket, hold it in place, dead still for a period of time, then a quick jurk, and use some small grips to pull the rest out.
Or take it in for a repair!
𝖕𝖊𝖗 𝖈𝖗𝖚𝖈𝖊𝖒 𝖆𝖉 𝖈𝖔𝖗𝖔𝖓𝖆𝖒
- Posts: 10460
- Joined: Sun Nov 27, 2011 8:21 pm
- Location: North Lincolnshire
- Has thanked: 2035 times
- Been thanked: 2753 times
I'd say you've been unfortunate rather than silly. (That's what results from service in the Diplomatic Corps)
Could you supply a a few close-up photo's of the offending device in order that an appropriate solution may be considered and brought to bear? Also are you competent with a soldering iron?
Good Luck - Regards ss47
A disservice is no service at all.
- Posts: 11107
- Joined: Sun Jul 10, 2016 6:54 pm
- Location: Oxfordshire
- Has thanked: 4478 times
- Been thanked: 5071 times
Pics would help. The superglue idea is genius
Other suggestion is tweezers - look in the make up bag of the nearest female you know if you don’t personally have any
I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil
Hammered silver 2019 - 22
- Posts: 209
- Joined: Tue Dec 12, 2017 10:00 am
- Has thanked: 482 times
- Been thanked: 136 times
While those suggestions sound like a lot of fun, is it not possible to unscrew the cover and push it out from inside? I’m not familiar with the CTX so maybe my suggestion is rubbish. If so, please feel free to ignore me - most people do
The harder I try the luckier I get.
- Posts: 5713
- Joined: Mon Apr 24, 2017 9:23 pm
- Has thanked: 1611 times
- Been thanked: 3085 times
If possible I'd unscrew the casings and ease out the offending remains as has been suggested. The skewer and superglue may work if the socket/ jack-plug have not been deformed. But whatever you do, do not
apply the super-glue direct into the jack-plug remains as it will likely then become permanently fixed there and it will not be much fun just watching the screen for targets in silence.
Good on you for asking as It's always better to take time to ponder over a solution than to make hasty regrettable decisions.
Nox 800, 15" coil & Garrett carrot.
White's TDI SL