Deus Coil and pin-pointer issue

Only for the discussion of the Deus Metal Detector.
Post Reply
mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Deus Coil and pin-pointer issue

Post by mrcheeky »

Hiya on my deus i have the pinpointer hooked up to come through ws4 headset and when i turn the pointer off the coil takes forever to come back on any ideas please ty


South London Metal Detector

User avatar
bob79
Posts: 1708
Joined: Mon Aug 15, 2011 1:01 pm
Location: Oxon/Wilts border.
Has thanked: 213 times
Been thanked: 354 times

Re: Deus Coil and pinpointerr Issue

Post by bob79 »

Which version are you running?

Bob ::g

User avatar
Oxgirl36
Moderator
Posts: 12691
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 5172 times
Been thanked: 5994 times

Re: Deus Coil and pinpointerr Issue

Post by Oxgirl36 »

Great question u;@ Upload v5.21 and all will be good ::g
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

Chilgrove
Posts: 361
Joined: Fri Dec 05, 2014 5:14 pm
Been thanked: 83 times

Re: Deus Coil and pinpointerr Issue

Post by Chilgrove »

Sorry cannot answer that specific point but I have found that when switching my Mi6 probe off I have to be very careful to keep my thumb on the button long enough to hear the "music" finish before releasing the button. Otherwise it takes me into la la land. I also use WS4 headphones.

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

bob79 wrote:
Mon Dec 23, 2019 2:21 pm
Which version are you running?

Bob ::g
hiya i just bought it so i think its the new 5.2 version i hope .. its only the lite for now. i hope so anyway because you cant update the lite right ?
South London Metal Detector

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

Oxgirl36 wrote:
Mon Dec 23, 2019 2:24 pm
Great question u;@ Upload v5.21 and all will be good ::g
can i update the lite version or do i just update the pointer ?
South London Metal Detector

User avatar
bob79
Posts: 1708
Joined: Mon Aug 15, 2011 1:01 pm
Location: Oxon/Wilts border.
Has thanked: 213 times
Been thanked: 354 times

Re: Deus Coil and pinpointerr Issue

Post by bob79 »

mrcheeky wrote:
Mon Dec 23, 2019 2:55 pm
bob79 wrote:
Mon Dec 23, 2019 2:21 pm
Which version are you running?

Bob ::g
hiya i just bought it so i think its the new 5.2 version i hope .. its only the lite for now. i hope so anyway because you cant update the lite right ?
Switch your Ws4's on and the Version will scroll across the display.

Bob ::g

User avatar
Oxgirl36
Moderator
Posts: 12691
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 5172 times
Been thanked: 5994 times

Re: Deus Coil and pinpointerr Issue

Post by Oxgirl36 »

mrcheeky wrote:
Mon Dec 23, 2019 2:56 pm
Oxgirl36 wrote:
Mon Dec 23, 2019 2:24 pm
Great question u;@ Upload v5.21 and all will be good ::g
can i update the lite version or do i just update the pointer ?
There are no updates for the pointer yet. The rest needs a controller to update - Lite users can go to a local stockist for a free update ::g

If you are on the latest version try uncoupling the pinpointer then pair it again. If you are then still experiencing problems contact your stockist as it might be faulty.
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

User avatar
PinkFloyd
Posts: 732
Joined: Fri Sep 27, 2019 9:31 pm
Been thanked: 406 times

Re: Deus Coil and pinpointerr Issue

Post by PinkFloyd »

I had to unpair/pair a few times when I has some issues with the mi6

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

thank you very much :)
South London Metal Detector

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

Ok so i redid the coil and the pinpointer whice is paired with the coil . when i turn on pointer the coil goes off which i understand. but what i dont understand is that it can take up to 1 minute for the coil to become active again any suggestions please x; btw its the 5.2 lite version
South London Metal Detector

principia
Posts: 166
Joined: Sat Oct 12, 2013 11:52 am
Has thanked: 38 times
Been thanked: 41 times

Re: Deus Coil and pinpointerr Issue

Post by principia »

mrcheeky wrote:
Thu Dec 26, 2019 2:06 pm
Ok so i redid the coil and the pinpointer whice is paired with the coil . when i turn on pointer the coil goes off which i understand. but what i dont understand is that it can take up to 1 minute for the coil to become active again any suggestions please x; btw its the 5.2 lite version
Indeed, that is not normal.
I am on version 5.21, and with that version, both the module and WS4 headphones switches between coil and pointer very fast (few seconds).
Et qui quærit, invenit
XP Deus , 11" X35, hf eliptical
C Scope CS6MXi
Deteknix X-pointer, XP MI-6

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

ok i just seen this is the version on it DEUS V5.1 Software so maybe an issue with the machine itself .thanks for your input appreciate it
South London Metal Detector

User avatar
bob79
Posts: 1708
Joined: Mon Aug 15, 2011 1:01 pm
Location: Oxon/Wilts border.
Has thanked: 213 times
Been thanked: 354 times

Re: Deus Coil and pinpointerr Issue

Post by bob79 »

mrcheeky wrote:
Thu Dec 26, 2019 2:06 pm
Ok so i redid the coil and the pinpointer whice is paired with the coil . when i turn on pointer the coil goes off which i understand. but what i dont understand is that it can take up to 1 minute for the coil to become active again any suggestions please x; btw its the 5.2 lite version
Double check the Version is V5.2 or V5.21 when you switch on, makes all the difference.

Bob ::g

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

thank you mate it says V5.1 Software not sure what to do now :(
South London Metal Detector

User avatar
bob79
Posts: 1708
Joined: Mon Aug 15, 2011 1:01 pm
Location: Oxon/Wilts border.
Has thanked: 213 times
Been thanked: 354 times

Re: Deus Coil and pinpointerr Issue

Post by bob79 »

mrcheeky wrote:
Thu Dec 26, 2019 3:56 pm
thank you mate it says V5.1 Software not sure what to do now :(
Contact the shop you got it from, tell them the trouble with the pinpointer and ask them to do an upgrade to V5.21b.

Bob ::g

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

thank you mte i think thats the best option cheers
South London Metal Detector

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pinpointerr Issue

Post by mrcheeky »

just been informed by the stockist i bought it from that it is already on 5.21 version
South London Metal Detector

principia
Posts: 166
Joined: Sat Oct 12, 2013 11:52 am
Has thanked: 38 times
Been thanked: 41 times

Re: Deus Coil and pinpointerr Issue

Post by principia »

mrcheeky wrote:
Fri Dec 27, 2019 10:46 am
just been informed by the stockist i bought it from that it is already on 5.21 version
Ok...but at start-up your WS4 controller you saw 5.1 version?
Et qui quærit, invenit
XP Deus , 11" X35, hf eliptical
C Scope CS6MXi
Deteknix X-pointer, XP MI-6

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pin-pointer issue

Post by mrcheeky »

all updated now thank you all
South London Metal Detector

User avatar
bob79
Posts: 1708
Joined: Mon Aug 15, 2011 1:01 pm
Location: Oxon/Wilts border.
Has thanked: 213 times
Been thanked: 354 times

Re: Deus Coil and pin-pointer issue

Post by bob79 »

mrcheeky wrote:
Fri Dec 27, 2019 6:23 pm
all updated now thank you all
Has it sorted the pinpointer problem out?

Bob ::g

mrcheeky
Posts: 204
Joined: Tue Jul 04, 2017 9:51 am
Location: South London
Has thanked: 111 times
Been thanked: 64 times

Re: Deus Coil and pin-pointer issue

Post by mrcheeky »

yes bob thank you as soon as i switch pointer on coil goes dead and then vice versa the pointer goes off and the coil comes back on within 2 seconds now. great relief i do like the idea of the pointer coming through the headset as i find it a little bit quite when its not linked.had a great day with it on me junk site nar me and found a dew coins ill upload some pics later and i used my nox 800 on the same spot. i noticed a big diffrence cant wait to get back out with it tommrow for a few hours.. thank you to everyone else they helped ^5
South London Metal Detector

User avatar
PinkFloyd
Posts: 732
Joined: Fri Sep 27, 2019 9:31 pm
Been thanked: 406 times

Re: Deus Coil and pin-pointer issue

Post by PinkFloyd »

Yes I also find the mi6 quiet when not paired to a deus , being submersible perhaps a louder speaker should of been fitted.

Post Reply

Return to “XP DEUS Forum”