Help with Identifying this item Please!

Please post any finds here that you wish help with identification.
Forum rules
IMPORTANT

Before creating an ID request please note you must:
1. include at least 2 photos of the item, both sides of a coin, or two angles of other items.
2. Include a ruler or other form of scale that clearly displays the scale in cm or inches. A coin or written dimensions is not acceptable.

Further information will also help, full guidance is below:
H - Have at least two good sized clear photos.
A - About your detecting day, type of land, depth found.
M - Measure items by doing the pics next to a scale or ruler.
M - Machine used and settings are interesting to other users.
Y - You will always get a better ID if you supply more information.
Post Reply
Maiz4
Posts: 2
Joined: Tue Feb 11, 2020 1:09 pm
Has thanked: 1 time
Been thanked: 1 time

Help with Identifying this item Please!

Post by Maiz4 »

Hello, I found this odd item in my garden in the summer in 2019. it was found at about 6 inches deep. an interesting note is that I live not too far from where a roman settlement was found I thought this might be some important information to say! its made of an iron material and was found using a Garrett ACE 150 on all metal setting. Any help or information on identifying this item will be greatly appreciated!! it is about 4.5 inches long and an inch wide at its widest!
You do not have the required permissions to view the files attached to this post.



User avatar
Ladybird66
Posts: 2456
Joined: Wed Apr 04, 2018 10:03 pm
Location: Pembrokeshire
Has thanked: 940 times
Been thanked: 1819 times

Re: Help with Identifying this item Please!

Post by Ladybird66 »

Looks like the handle off a cast iron cooking pot. Probably approx 1800’s

Housewives must have been much stronger back then :D

Maiz4
Posts: 2
Joined: Tue Feb 11, 2020 1:09 pm
Has thanked: 1 time
Been thanked: 1 time

Re: Help with Identifying this item Please!

Post by Maiz4 »

Wow! thanks for the response! that is amazing!!!

User avatar
Oxgirl36
Moderator
Posts: 12723
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 5195 times
Been thanked: 6009 times

Re: Help with Identifying this item Please!

Post by Oxgirl36 »

Not convinced it’s a handle (sorry LB). The hole end looks like it might be but the other end is pointed from what I can see. It’d be too weak :-/

Trouble is I don’t know what it is which isn’t helpful. I guess it could be a guide spike thing. Push it in the ground and run rope or something through the hole?
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

NoxHunter
Posts: 283
Joined: Sun Dec 15, 2019 3:37 am
Has thanked: 73 times
Been thanked: 142 times

Re: Help with Identifying this item Please!

Post by NoxHunter »

My be it’s a fishing needle for fixing sea fishing nets ::g
🏴‍☠️ Minelab Equinox Dirt Fishing For Gold.Silver.Copper.Bronze 🏴󠁧󠁢󠁥󠁮󠁧󠁿 Staffordshire 🇬🇧

User avatar
beaubrummell
Posts: 3948
Joined: Sat Mar 30, 2013 12:50 pm
Location: Essex
Has thanked: 41 times
Been thanked: 358 times

Re: Help with Identifying this item Please!

Post by beaubrummell »

Old tent peg?
E-Trac
Detech Ultimate
SEF 8x6
Deteknix Wader Li Xpointer
Lesche Digging Tool
AMES entrenching tool
Souped-up Spear & Jackson mini spade
Chefphones CP2 Black
Tomcat Dakota boots
NCMD membership number 13566

NoxHunter
Posts: 283
Joined: Sun Dec 15, 2019 3:37 am
Has thanked: 73 times
Been thanked: 142 times

Re: Help with Identifying this item Please!

Post by NoxHunter »

Or is it gust a broken blade from a old grass borer sheers s ::g
🏴‍☠️ Minelab Equinox Dirt Fishing For Gold.Silver.Copper.Bronze 🏴󠁧󠁢󠁥󠁮󠁧󠁿 Staffordshire 🇬🇧

User avatar
ratty
Posts: 566
Joined: Mon Nov 04, 2019 10:42 am
Location: Banbury
Has thanked: 469 times
Been thanked: 345 times

Re: Help with Identifying this item Please!

Post by ratty »

Might be a drill drift, these are for removing Morse taper drills from drill presses, no chuck required the taper on the drill shank fits the quill on the machine. :)

https://www.google.com/search?q=drill+d ... 74&bih=673

User avatar
Easylife
Posts: 5789
Joined: Mon Apr 24, 2017 9:23 pm
Has thanked: 1633 times
Been thanked: 3131 times

Re: Help with Identifying this item Please!

Post by Easylife »

If I had dug that it would now be under a hedge somewhere. It perhaps has a slight curve to it?
Nox 800, 15" coil & Garrett carrot.
White's TDI SL

User avatar
oldartefact
Posts: 8432
Joined: Sun Dec 30, 2012 12:31 am
Location: Gods own county - numero uno!
Has thanked: 1922 times
Been thanked: 1526 times

Re: Help with Identifying this item Please!

Post by oldartefact »

Looks like a needle of some use... do your live in an area where fishing might have been an occupation?
Imagine there is no heaven, only sky above us.

User avatar
thefiggis
Moderator
Posts: 6186
Joined: Sat Feb 18, 2017 8:19 am
Location: Norfolk
Has thanked: 1737 times
Been thanked: 2200 times

Re: Help with Identifying this item Please!

Post by thefiggis »

Looks like one of them plant trainer jobbies - you know, the bit that's hammered into the brickwork and gets a wire passed through it.
Essential equipment:
Some sort of electrical gubbins(I'm told it's a Deus). In various colours
Jenkins
Gin.

User avatar
Phil2401
Posts: 1592
Joined: Sun Dec 04, 2016 3:31 pm
Has thanked: 1117 times
Been thanked: 909 times

Re: Help with Identifying this item Please!

Post by Phil2401 »

I once had an old petrol lawnmower with a series of 'flails' just like that....

Phil
Quaerite et invenietis

XP Deus

User avatar
Ladybird66
Posts: 2456
Joined: Wed Apr 04, 2018 10:03 pm
Location: Pembrokeshire
Has thanked: 940 times
Been thanked: 1819 times

Re: Help with Identifying this item Please!

Post by Ladybird66 »

Just realised the thingy is only 4 3/4 inches long so def not a pan handle. Too short ::g

Koala
Posts: 5105
Joined: Thu Sep 12, 2013 2:47 pm
Location: Cheshire
Has thanked: 439 times
Been thanked: 1639 times

Re: Help with Identifying this item Please!

Post by Koala »

what ever it is there a fair few in most fields


I kept one. Came in handy when I miss layed my ball joint separator.

User avatar
Oxgirl36
Moderator
Posts: 12723
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 5195 times
Been thanked: 6009 times

Re: Help with Identifying this item Please!

Post by Oxgirl36 »

Koala wrote:
Tue Feb 11, 2020 9:42 pm
what ever it is there a fair few in most fields


I’ve never found one. I feel left out now :-w

=))
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

User avatar
sweepstick47
Moderator
Posts: 11268
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 2422 times
Been thanked: 3132 times

Re: Help with Identifying this item Please!

Post by sweepstick47 »

I thought it looked familiar and have just realised where I'd seen something very similar. My last house was listed building and I removed an identical device from the mortar of an outbuilding (my workshop) when replacing a door frame. We used to support a clothes line from it as there was a another opposite in the wall of the house. I've also seen very similar items in pairs on external walls of older houses from which 'window shutters' were hung. Regards ss47
A disservice is no service at all.

User avatar
fred
Posts: 11444
Joined: Wed Dec 10, 2014 6:15 pm
Location: Kent
Has thanked: 2955 times
Been thanked: 7081 times

Re: Help with Identifying this item Please!

Post by fred »

I rather suspect from the answers that this could have been used to connect a wire, line or chain to a wall or timber. The original purpose probably was less important than the fact that it worked. :D
Equinox 800 x2

pete m
Posts: 8
Joined: Fri Feb 07, 2020 3:16 pm
Location: east yorkshire
Has thanked: 1 time
Been thanked: 5 times

Re: Help with Identifying this item Please!

Post by pete m »

Yes its vine eye would have a row of them hammered into the wall with wire running through to attach plants to.

Post Reply

Return to “Identification of Finds Forum”